Career |
 |
|
|
CUrrent openings |
 |
| |
| DISCIPLINE: PIPING |
| |
Post: 1 - Lead Engineers |
|
| |
Experience: Mechanical Engineers with 15 – 25 years of experience and should have led a piping team as Lead Engineer for a refinery/petrochemicals/fertilizer unit. Sound grip over whole work process involving complete piping engineering & design, and familiarity with other disciplines. Capability to own Piping Design of a Unit, and ability to lead group of Designers and Draftsmen. Should be well versed with Equipment layout, key plan, PMS, VMS, piping, squad check. PDS, Equipment & piping modeling, MTO through MTO software, stress analysis & engg for procurement & subcontracting. Knowledge of latest software tools is a must. Initiative and people management are the most desirable traits. |
| |
|
Apply |
| |
| |
Post: 2 - Engineers |
|
| |
Experience:
Mechanical Engineers with 5-10 years in piping /valve materials specification/selection, plot plan/equipment/piping layout/isometrics, stress analysis, Piping/Valve/supports MTO, procurement engineering/services, vendor drawings review in the filed of Oil & Gas/refineries/petrochemical plants. Must be conversant with MS Office/AutoCAD/Caesar etc of latest version. |
| |
|
Apply |
| |
| |
Post: 3 - Designers |
|
| |
Experience: Diploma Holders in Mechanical engineering with 8-15 years of experience as designers worked in the filed of Oil & Gas/ refineries / petrochemicals plants. Should be well versed in design piping layouts/conceptual study, design / checking of equipment/piping layout/pipe rack, isometrics with BOM, bulk MTO, nozzle orientation. Proficiency in 2D/3D PDS and knowledge of latest software tools is a must. |
| |
|
Apply |
| |
| |
Post: 4 - Modelers |
|
| |
Experience: Diploma Holders in Mechanical engineering with 8-15 years of experience in PDS modeling equipment & piping, extracting isometrics and piping plans. Should have worked in the filed of Oil & Gas/ refineries / petrochemicals plants. Proficiency in 2D/3D PDS and knowledge of latest software tools is a must. |
| |
|
Apply |
| |
| DISCIPLINE: CIVIL & STRUCTURAL ENGINEERING |
| |
Post: 1 - Lead Engineers (BE in Civil) |
|
| |
Experience: 11 to 20 years design experience. Experience with and specific knowledge of Indian & International codes preferably American & British. Estimate RCC & Steel quantities required for at pre-bidding stage and be capable of preparation of Proposals for bidding. Posses leadership qualities capable of effectively leading a team of Engineers & Designer / Draftspersons interacting with Projects and other Disciplines for the assigned job. Familiar with Staad Pro for analysis & design of RCC & Steel structures. |
| |
|
Apply |
| |
|
| |
Post: 2 - Engineers |
|
| |
Experience: 8 to 10 years design experience. Shall be proficient in design & detailing of Static & Dynamic Equipment foundation, design & detailing of Steel structures & foundation for Pipe Rack & Cable rack supporting structures, Equipment mounted Steel Platforms, Associated RCC & Steel Process Structures and Buildings including Blast resistant structures for plants using Staad Pro software. Proficient in usage of Indian & International Codes such as BS, ACI, AISC, UBC, IBC, and Euro Codes. Estimate RCC & Steel quantities required at pre-bidding stage and assist in preparation of Proposals for bidding.
Preferences will be given to candidates with added knowledge of general civil works such as paving, drainage and u/g piping. |
| |
|
Apply |
| |
|
| |
Post: 3 - Senior Designers/Designers |
|
| |
Experience: 11 to 20 yrs experience in checking Civil &Structural steel drawings for at least 3 years. Good exposure in both bolted & welded connections for Steel structures. Significant work experience in drafting of Industrial projects in structural steel and reinforced concrete, utilizing AutoCAD/ Micro station 2D and 3D. Shall be able to calculate MTO's of RCC & Steel quantities. Should be able to perform squad check of vendor drawings and drawings from other disciplines, review fabricator drawings and assist the Design Supervisor, as required. Shall be able to lead a Drafting team, Coordinate among the Engineers for drafting / detailing , guide Junior draftspersons in detailing of Civil & Structural works and also interface with other design disciplines. Familiar with AutoCAD and Microstation for preparation of 2D drawings, Knowledge of PDS Frame works modeling will be an added advantage. detailing of RCC & Steel structures for both bolted & welded connections. Calculate MTO's of RCC & Steel quantities. |
| |
|
Apply |
| |
|
| |
Post: 4 - Senior Draftspersons/Draftsperson |
|
| |
Experience: 3 to 10 years experience in preparation of RCC & Structural steel drawings using AutoCAD. Develop detailing of RCC & Steel structures for both bolted & welded connections. Calculate MTO's of RCC & Steel quantities. Should be well familiar with AutoCAD and Micro station for preparation of 2D drawings, Knowledge of PDS Frame works modeling will be an added advantage. |
| |
|
Apply |
| |
|
| |
Post: 5 - PDS Modeler |
|
| |
Experience: 8 to 15 years in PDS Frame works modeling of RCC & Steel structures. He shall be able to prepare 2D drawings extracting from PDS Modeling & shall be able to calculate MTO of RCC & Steel quantities. Shall be well familiar with AutoCAD & Microstation for preparation of 2D drawings. |
| |
|
Apply |
| |
| DISCIPLINE: ELECTRICAL |
| |
Post: 1 - Lead Engineers [Engineering degree in Electrical] |
|
| |
Experience: 5 to 15 yrs of experience in calculations for sizing of transformer, DG, UPS, battery and charger, cable sizing, bus duct/bus bar sizing, short circuit calculation, CT sizing, NGR and NGT sizing, earthing/lightning protection calculation, protection coordination/relay setting calculation, selection of equipment for hazardous area, etc. System studies including Load flow, short circuit, insulation coordination, stability analysis, motor starting study, etc using software/s available in the market such as ETAP, EDSA, CYME, etc. Procurement activities such as preparation of specification, technical evaluation of offers, preparation of purchase specification, vendor drawing review, witness testing of electrical equipment, cathodic protection system, heat tracing system, plant communication system, SCADA, DAS, etc. Equipment layouts for Indoor substation, switchyard plan and sections, cable trench/tray routing, bus duct routing, earthing and lightning protection layout, Lighting layout, hazardous area classification layout, schematic and interconnection diagrams, etc. Preparation of Material take-off, interaction with other disciplines, review tender documents, man-hour estimates, to perform as lead electrical engineers for projects etc.,Familiarization with IE rules, IEC, BIS, IEEE, standards for electrical equipment. Familiarization with IE rules, IEC, BIS, IEEE, standards for electrical equipment. Proficiency in computer operation, Fluency in English to write mails, etc. |
| |
|
Apply |
| |
| |
Post: Designers: 2 - Diploma in Electrical |
|
| |
Experience: 5 years of experience in Drafting /checking of Single line diagram, equipment layouts for Indoor substation, switchyard plan and sections, cable trench/tray routing, bus duct routing, earthing and lightning protection layout, Lighting layout, hazardous area classification layout, schematic and interconnection diagrams, etc. Knowledge of switchgear, transformer, cable schedule, Lighting calculation, cable sizing, electrical symbols, device numbers, etc is essential. Should be able to produce the above mentioned electrical drawings with minimum guidance. Proficiency in AutoCAD is a must. |
| |
|
Apply |
| |
|
| |
Post: 3 - PDS Modeller [ Diploma in Electrical] |
|
| |
Experience: Should have undergone training in PDS 3 D modeling. Familiar with “Equipment Module” of PDS to carry out modeling of instruments, Junction boxes, Distribution boards, etc., Trained in PDS modules “EE Raceway” for cable tray modeling. Extraction of 2D drawings from the PDS model, interaction with other disciplines such as piping, civil/structural and production of deliverables in 2D. |
| |
|
Apply |
| |
| DISCIPLINE: INSTRUMENTATION [Engineering degree in Instrumentation/Electronics & Communications/Electrical & Electronics |
| |
Post: 1 - Engineers |
|
| |
Experience: More than 10 years experience in Preparation/checking/approval of Instrument Index, Calculations for sizing of control valves, flow elements, orifice plates, etc., selection of equipment for hazardous area, etc. Procurement activities such as preparation of specification including datasheets, technical evaluation of offers, preparation of purchase specification, vendor drawing review for Field Bus System, Distributed Control System ( DCS), Programmable Logic Controller (PLC), Fire Alarm System, SCADA, DAS, etc., witness testing of instrumentation / control systems, preparation of FAT / SAT procedures. Review of P&ID, review of piping specifications. Familiarization in software’s such as “Instrucalc” and Smart Plant Instrumentation (“INTOOLS”) is essential. Familiarization with ISA recommendations, IEC, BIS, IEEE, API standards as applicable for instrumentation. Proficiency in computer operation, Fluency in English to write mails, etc. |
| |
|
Apply |
| |
|
|
| |
Post: 2 - Designers [Diploma in Electrical] |
|
| |
Experience:
5 years experience in Drafting /checking of Hook up drawings, Instrument installation details, Loop drawings, Logic diagrams, interconnection drawings, instrument cable trench/tray routing, instrument / electronic earthing layout, power supply arrangement for instruments, schematic and interconnection diagrams, etc. Some of the deliverables are to be made using INTOOLS software. Knowledge of instruments, PLC control logics, DCS, DAS, instrument symbols, etc., is essential. Should be able to produce the above mentioned instrument drawings with minimum guidance.
DISCIPLINE: PROCESS |
| |
|
Apply |
| |
|
|
| |
Post: 3 - ENGINEERS |
|
| |
Experience: Chemical Engineers with 8-10 years and having proven track record of Conceptual to Detailed Engineering and design in the field of process background of refinery/petrochemicals/fertilizer unit. knowledge of latest software tools is a must.
|
| |
|
Apply |
| |
|
|
Please apply through online and alternatively forward your resume to the following e-mail: |
hr@valdelec.com |
|
